Blodgett DFG-100 SERIES User Manual

Installation
5
Oven Assembly
NSF BOLTS
These bolts are required by NSF to block any ex -
posed hole on the back of an oven. This includes:
D any unit, single or stacked, without a back panel.
D any holes in stacked units not used for mount-
ing stacking brackets.
1. Locate the 5/16” bolts that were shipped with
the oven.
2. InstalltheboltsasshowninFigure3.
Double Stacked Units Units without Back Panels
Figure 3

Blodgett DFG-100 SERIES Specifications

General

Brand	Blodgett
Model	DFG-100 SERIES
Category	Convection Oven
Language	English