What to do if Bluetti EP600 shows Grid Voltage High?
If the Bluetti Storage unit frequently displays a 'Grid Voltage High' error, verify that the grid voltage and frequency are within the inverter's specified input range. Also, inspect the inverter's AC circuit breaker and connections. If the voltage and frequency fall outside the acceptable range, it is recommended to contact the BLUETTI support team.
What to do if my Bluetti Portable Generator displays USB Format Error?
If your Bluetti Portable Generator displays a USB Format Error, ensure that the USB drive is formatted as FAT32 and its maximum memory is 32G. Also, verify that the upgrade files exist and haven't expired. Download the latest upgrade files if needed.
What to do if my Bluetti Portable Generator displays BMS Charge Protection?
If your Bluetti Portable Generator displays a BMS Charge Protection error, check the details on the BLUETTI app.
What to do if Bluetti Storage shows BMS Communication Interrupted?
To address the 'BMS Communication Interrupted' error on your Bluetti storage, turn off the inverter, wait for 30 minutes, and then restart it. If the problem remains, please contact the BLUETTI support team.
What to do if Bluetti EP600 shows Balanced Circuit Input Overcurrent?
To address the 'Balanced Circuit Input Overcurrent' error on your Bluetti storage, turn off the inverter, wait for 30 minutes, and then restart it. If the problem remains, please contact the BLUETTI support team.
What to do if my Bluetti Audio & Video Accessories display 'BMS Communication Interrupted'?
If your Bluetti Audio & Video Accessories display 'BMS Communication Interrupted', turn off the inverter and wait 30 minutes before restarting it. If the issue continues, contact the BLUETTI support team.
What to do if my Bluetti Audio & Video Accessories display 'DSP Communication Interrupted'?
If your Bluetti Audio & Video Accessories display 'DSP Communication Interrupted', turn off the inverter and wait 30 minutes before restarting it. If the issue continues, contact the BLUETTI support team.
What causes PV1 Voltage Low on Bluetti EP600?
Check the PV setup. Solar panels may get a low voltage without proper working conditions.
What to do if my Bluetti Audio & Video Accessories display 'GFCI Failure'?
If your Bluetti Audio & Video Accessories display 'GFCI Failure', check if the AC output PE wire is grounded.
What to do if my Bluetti Audio & Video Accessories display 'Phase Sequence Error'?
If your Bluetti Audio & Video Accessories display 'Phase Sequence Error', check if the grid connection meets installation requirements.
General| Shape | Rectangle |
|---|---|
| Certification | UL9540A, UL1973, UKCA, RCM, PSE, ICES, FCC, CE, CB |
| Built-in display | - |
| Suitable for outdoor use | Yes |
| Power protection features | Overheating, Reverse polarity, Under voltage |
| International Protection (IP) code | IP65 |
| Waveform | Pure sine |
| Input voltage | 150 - 500 V |
| Output voltage | 230/400 V |
| Charging source | AC, Solar |
| Battery capacity | - mAh |
| Battery technology | Lithium Iron Phosphate (LiFePO4) |
| Total output power | 6000 W |
| Output current (max) | 8.7 A |
| Operating temperature (T-T) | -20 - 50 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
Weight and Dimensions| Depth | 325 mm |
|---|---|
| Width | 636 mm |
| Height | 370 mm |
| Weight | 40000 g |
To Next Page
