Bluetti EP600 - Safety Instruction

JUST POWER ON60
1.SAFETY INSTRUCTION
1.1 Safety instruction
Please read the guidebook before using the equipment.
The technician responsible for installing must hold an electrician certificate,
because some components might electric charged or heat up when the EP600
energy storage system running, improper operation,incorrectly install or operate
might cause the serious damage of personal safety and property.
Don't place the equipment near the heat producer, it's forbidden to place or
power on the Energy Storage System in the environment with flammable，
explosive gas and smoke.
Except the authorized technician, please don't replace any components of Energy
Storage System arbitrarily.There's no replaceable component in the package.
Please use the Energy Storage System in the well-ventilated environment, don't
block the air vent of Energy Storage System, poor ventilate might cause the
irreversible damage to the Energy Storage System.
Please don't place other object on the top of Energy Storage System when
operating or settling.
Please don't move the Energy Storage System when it's operating, because the
vibration and the shock produce from movement might cause the internal
hardware failure.
Warning
Instruction
Please don't insert foreign object into any port of Energy Storage
System. Please be aware of operating and keep children away from
the Energy Storage System. If the Energy Storage System is on fire,
please use dry powder extinguisher to put out the fire.
For security, please use the cables configured by the original factory.
We will not responsible for the equipment damage cause by the
third-party device.
The safety requirement of the guidebook aren't including the
whole technical requirement but a supplementary instruction, the
actual operation are contact with the on-site condition.