JUST POWER ON72
2.3 Base List
1
1
Base
No. DescriptionPicture Quantity
2.4 About installation
2.4.1 Installation Environment Requirements
Choose a dry, tidy place for easy installation
The protection level of the inverter and battery pack is IP65, and can be installed
both indoors and outdoors.(If it is installed outdoors, additional protective
measures are necessary to avoid direct sunlight)
If the system is installed in direct sunlight, the performance of the system may
be degraded as the temperature rises.
During the operation of the inverter, the temperature of the body and heat sink
will be relatively high. Do not install the inverter in an easily accessible location.
No flammable and explosive substances can exist in the installation environ-
ment.
Do not install where children can reach
Do not install outdoors in coastal areas, which areas within 500 meters from the
coast or affected by sea breezes. The sedimentation amount of salt spray varies
relatively widely depending on the characteristics of seawater, sea breeze, precipi-
tation, air humidity, topography and forest coverage in the adjacent sea areas.
The system should be installed in a well-ventilated environment to ensure good
heat dissipation.