JUST POWER ON 11
1.5.3 General Requirements
•
Do not expose the battery to high temperatures or around heat sources, such as
sunlight, fire, transformers and heaters. If the battery overheats, it may cause a fire.
• To avoid leakage, overheating or fire, do not disassemble, modify or damage the
battery. For example, do not insert foreign objects into the battery or place the
battery in water or other liquids.
• If any part of the battery is immersed in water, do not touch the battery to avoid
electric shock. Please contact the battery recycling company for handling.
• Do not short-circuit the battery terminals. A short circuit can cause a fire.
• Never use damaged batteries or components. Improper use or misuse of
damaged batteries or components can damage your device or injure yourself as a
result of battery fluid leakage, fire, overheating, or explosion.
• Do not perform welding or grinding work around the battery to prevent fire
caused by sparks or arcs.
• Do not store damaged batteries near undamaged ones, as damaged batteries
may leak flammable liquid or gas. Only qualified professional or trained personnel
is allowed to approach damaged batteries.
• The fire hazard of lithium-ion battery energy storage system is high. Before
handling batteries, consider the following risks:
(a)Battery thermal runaway may produce flammable and harmful gases such as
CO and HF. Vapors from burning batteries may irritate eyes, skin and throat.
(b)The concentration of flammable gases from battery thermal runaway may lead
to deflagration and explosion.
• Users or third parties using the battery in ways not specified in the user manual, including
using batteries from other brands, using BLUETTI batteries with different rated capacities,
or mixing the specified batteries with the aforementioned types.
1.5.2 Installation Requirements
•
Do not use batteries with compromised packaging. Make sure the battery switch is
in the OFF position.
• Tighten the screws securely and conduct regular checks.
• Prevent the positive and negative terminals of the battery from touching each
other or any metal objects to avoid heat generation or electrolyte leakage.
• After installing the equipment, remove unused packing materials such as foam,
carton, plastic and excess cables from the equipment area.
To Next Page
Loading...
