Bluetti EP800 - Page 77

JUST POWER ON 77
My utility provider offers a Time of Use (TOU) electricity tariff. How can I use the
EP800 to save on peak electricity costs?
You can configure the Time of Use mode to fit your specific needs. During the
charge period, the EP800 draws power from the grid, typically during off-peak
tariff hours when electricity rates are lower, to replenish its energy storage and
discharges during peak hours.
To set this mode, please follow the steps below:
1.Go to the Advanced Settings and turn on the Charge From Grid.
2.Go to the Settings menu, tap on Working Mode, and select Time of Use.
3.Tap on Manage Charge/Discharge Time and designate time periods with
lower electricity rates as Off-Peak and higher rate periods as Peak.
Note: A maximum of 6 time periods can be set, with the earliest as the first and
the latest as the last.
Can I power on the B500 unit separately by pressing its power button?
Yes, you can.
Can I charge the EP800 using a generator?
We recommend using a generator with a voltage greater than 240V and a
power greater than 5000W to charge the EP800.
Can I install the EP800 outdoors?
Absolutely, the EP800 is equipped with a NEMA 4X protection rating. However,
if you plan to install it in a location that is directly exposed to sunlight, it is
advisable to purchase a separate power shelter from BLUETTI's official website.
This will provide additional protection and ensure the EP800 operates safely,
reliably, and efficiently in all weather conditions.
Q21:
A:
Q22:
A:
Q23:
A:
Q24:
A: