JUST POWER ON76
What should I keep in mind when setting the charging and discharging time?
When setting the charging and discharging time, it's important to note the
following:
1. Arrange the time periods in chronological order, starting with the earliest and
ending with the latest.
2. Avoid time periods that span into the next day.
Why does the solar panel stop working when the battery is full, even if there are
devices using power?
This is completely normal. If there are fluctuations in the power usage while the
solar panel is charging the battery, it can temporarily stop to prevent overcharg-
ing. As soon as the battery's power level decreases while running devices, the
solar panel will automatically start working again.
How can I share access to the EP800 with others?
If you want to invite other BLUETTI App users to control the EP800, please
follow the steps below:
1.Open the App and go to Settings.
2.Select the Share Device option and generate the QR code.
3.Have others scan the QR code using the BLUETTI App.
Please note that the QR code is valid for 10 minutes and you can share access
with up to 5 accounts simultaneously.
How can I set the EP800 as a backup power source?
The EP800 is designed to operate in Backup UPS mode by default, providing a
reliable home backup power source that kicks in only when the grid fails.
To activate this mode, access the Settings menu, navigate to Working Mode,
and select the Backup mode.
How can I optimize solar energy usage and achieve energy self-sufficiency?
You can enable the Self-consumption mode on the EP800. In this mode, the
EP800 prioritizes direct consumption of solar energy for immediate household
needs and stores excess energy in the battery for later use. With such a strategy,
the EP800 ensures an efficient and reliable power supply, reducing reliance on
the grid and promoting energy independence.
To enable this mode, access the Settings menu, navigate to Working Mode, and
select the Self-consumption mode.
Q16:
A:
Q17:
A:
Q18:
A:
Q19:
A:
Q20:
A: