YH-600B Pro User Manual V3.0
74 / 88
Fig.2-47
Airflow includes “Pressure Airflow Sensor” and “Chest Effort
Movement”.
SpO
2
includes “SpO
2
”.
Snore includes “Snore”.
For the selection of the above signals, if there is no signal in the
corresponding channel in the waveform, the channel shall be
selected as empty at this time to avoid bad signals which may
disturb the analysis results.
Parameter settings include analysis range Respiratory Event,
SpO
2
Event, Snoring Event, Sleep Staging, Pulse rate and
other parameters, as shown in Fig. 2-48.
To Next Page
Loading...