EasyManua.ls Logo

BMPRO BatteryPlus35SR - About the BatteryPlus35 Power Supply; Accessories

BMPRO BatteryPlus35SR
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
Accessories
Accessories provided with this product are:
System Manual
About the BatteryPlus35 Power Supply
The BatteryPlus35 is a smart charger with a distribution system which has been
designed for use in recreational vehicles. The unit operates from 100VAC to 240 VAC
and provides an isolated DC output at 35A maximum (derates to 32A at high ambient
temperature) for powering the loads, out of which a limited amount of current is
reserved for charging the caravan battery. All the necessary protection and operating
features for the load and battery are provided. BatteryPlus35 uses electronic fuses
to protect the wires connected to the loads.
A DC input is also provided to enable battery charging and powering of the load from
an external source, such as a car.
BatteryPlus35 has a solar input. Solar panels can be connected directly to
BatteryPlus35SR or BatteryPlus35HA, an external regulator must be installed for
BatteryPlus35PM, See table below.
MPPT- Maximum Power Point Tracking
The unit is fully enclosed ready for direct wall mounting. All connections are at the
base of unit providing convenient wiring and installation.
Note: When a BatteryPlus35PM is powered for the first time, the red LED will blink
for 30s, then resume normal LED pattern.
BatteryPlus35PM BatteryPlus35SR BatteryPlus35HA
Solar MPPT
No Yes Yes
Solar Input
External Regulator
required
Direct Solar Panel
connection
Direct Solar Panel
connection
Battery Chemistry
Lead-Acid Only Lead-Acid Only
Lead-Acid
LiFePO4
Absorption Charging
Current Max
20A 20A 30A
AX-Solar Blending
Yes Yes Yes

Table of Contents

Other manuals for BMPRO BatteryPlus35SR