50
INTRODUCTION
RVView monitors and displays vital battery information such as volts and amps,
charge/discharge status and details of the source input for your recreational vehicle
12V system.
RVView is permanently wired into the BatteryPlus35 in the recreational vehicle and
continuously monitors battery information, providing vital data at a glance using a
clear back-lit display.
Safety Precautions
Please read the Safety Precautions carefully before installing the unit.
Failure to observe these instructions properly may result in
property damage or personal injury, which may be serious
depending on the circumstances.
Refer to the installation section before operating. Correct installation is the most
critical factor in ensuring the safe use of the power supply. If every consideration
of these instructions has been satisfied the power supply will be safe to operate.
As this unit is powered by a communication cable it is critical that all connections
and cables are in a good and working order and properly connected.
Do not allow water or other liquids to enter the installation area.
CAUTION
Accessories
The following accessories are provided with RVView.
• RVView Unit
• RVView Manual
• 4 Mounting Screws
About RVView
The RVView is a display unit that connects to BatteryPlus35 and displays battery or
system information. Its backlit LCD displays information includes:
• System voltage
• Input and output current
• Battery charging and discharging indicator
• Power Source – Mains, Solar or Car
• Warning indicator
• Battery charge status
• Back-light which turns on for 30 seconds