BREAK-IN PERIOD
Engine
A break-in period of 10 operating hours
is required before running the vehicle
at sustained full throttle.
CAUTION:
Never mix oil with fuel.
This vehicle has a 4-stroke engine.
Oil must be added to engine base
only.
During this period, maximum throttle
should not exceed 3/4. However, brief
full acceleration and speed variations
contribute to a good break-in. Contin-
ued wide open throttle accelerations,
prolonged cruising speeds and engine
overheating are detrimental during the
break-in period.
Belt
Traxter MAX CVT
A new belt requires a break-in period
of 50 km (30 miles). Avoid strong ac-
celeration/deceleration, pulling a load
or high speed cruising.
10-Hour Inspection
As with any precision piece of me-
chanical equipment, we suggest
that after the first 10 hours, 250 km
(150 m.) or 30 days after the pur-
chase, whichever comes first, your
vehicle be inspected by an authorized
Bombardier ATV dealer. This inspec-
tion will give you the opportunity to
discuss the unanswered questions
you may have encountered during the
first hours of operation.
The 10-hour inspection is at the ex-
pense of the vehicle owner.
While reading this Operator’s Guide, remember that:
WARNING
Indicates a potential hazard that, if not avoided, could result in serious in-
jury or death.
112
_____________________
To Next Page
Loading...
Need help?
General
