I: Inspect, verify, clean, adjust,
lubricate or replace if
necessary
EVERY
C: Clean
L: Lubricate
R: Replace
Initial in-
spection
10 h or
30 days
or 250 km
(150 m.)
(1)
25 h or
625 km
(388 m.)
50 h or
1250 km
(777 m.)
100 h or
1 year or
2500 km
(1553 m.)
200 h or
2yearsor
5000 km
(3107 m.)
To be
performed
by
SUSPENSION
Swing arm
(2)
I Dealer
Shock absorbers
(2)
I Dealer
A-arms lubrication I Customer
BRAKE
Brake fluid (front and rear)
(2)
I I R
(6)
Customer
Brake cable
(6)
I I Dealer
Brake pads
(6)
I
(4)
Customer
Brake system
(discs, hoses, etc.)
(6)
I Customer
BODY/FRAME
Engine compartment C C Customer
Skid plates EVERY RIDE Customer
Frame I Dealer
Hitch/trailer ball condition
(if installed)
EVERY RIDE Customer
Chassis Fasteners I Customer
Seat fasteners EVERY RIDE Customer
Backrest EVERY RIDE Customer
Grab handles EVERY RIDE Customer
Front storage compartment
cover latches
(2)
EVERY RIDE
Customer
Vehicle cleaning and protection C
(4)
Customer
(1) To be performed by an authorized Bombardier ATV dealer. The initial maintenance is very
important and must not be neglected.
(2)
Pre-ride inspection item.
(3)
Every 100 hours, check coolant strength.
(4)
More often under severe use such dusty area, sand, snow, wet or muddy conditions
(5)
Make sure the spark plug is correctly gapped.
(6) Brake fluid replacement or any brake system repairs must be performed by an authorized
Bombardier ATV dealer.
128
_____________________