1. Remove the grill and the burners from the hob.
2. SR – R – P burners: unscrew injectors using a 7mm spanner
and replace them with those for the new gas according to the
troubleshooting table.
3. DCC – Dual burners: unscrew the 2 screws and remove cover.
Unscrew the injectors using a 7mm spanner and replace them with
those for the new gas according to the nozzle table.
101
Replacement of model injectors
Boretti Maggiore Cookers / Installation / Use / Maintenance EN
To Next Page
Loading...
