— for all rubber-coated rotors
—
2x for screw rotors
W... rotor puller for auxiliary puller
Dual-lobe rotors
—
The W... rotor puller in combination with the Z... auxiliary puller
and two suitable screws (not included in the scope of supply) is
to be used for dual-lobe rotors with cover disk.
— 2x for screw rotors
Tri-lobe rotors
—
The W... rotor puller in combination with the Z... auxiliary puller
and three suitable screws (not included in the scope of supply)
is to be used for tri-lobe rotors with cover disk.
— 2x for screw rotors
W1 - Sealing compound
— 50 ml (0.013 gal) tube
—
200 ml (0.053 gal) tube
Z... auxiliary puller, dual-lobe
— The Z... auxiliary puller in combination with the W... rotor puller
and two suitable screws (not included in the scope of supply) is
to be used for dual-lobe rotors with cover disk.
— 2x for screw rotors
Z... auxiliary puller, tri-lobe
— The Z... auxiliary puller in combination with the W... rotor puller
and three suitable screws (not included in the scope of supply)
is to be used for tri-lobe rotors with cover disk.
—
2x for screw rotors
Appendix
BA-Classic FL_en-US, 03.05.2018www.boerger.de / www.boerger.com182
To Next Page