WARNING!
Risk of serious injuries caused by liquid spouting out or
escaping gases!
Gases or liquids may escape uncontrollably from seals and screw
connections. Especially when flange connections are released
and maintenance openings are opened, pressurized liquid can
spout out at the cover
.
Never loosen connections when the unit is pressurized.
— Ensure that all valves and shut-off devices on the inlet and
outlet are closed.
— Depressurize and empty the Börger machine through a
drainage device, if available.
— Immediately absorb escaping media using suitable agents
and dispose of it in accordance with the applicable local regu-
lations.
— Therefore, wear your personal protective equipment (PPE) as
described in
Ä
Chapter 2.6 “Personal protective equipment”
on page 23 when opening the cover and take all necessary
precautions.
CAUTION!
Health hazard due to residues of dangerous medium inside
and on the Börger machine!
There is an increased health hazard from contact with the
medium and contaminated components.
Generally, the following applies:
—
When using dangerous or health-endangering media, take all
necessary safety measures when performing work on the
Börger machine.
— Avoid direct contact with the medium (skin/eye contact, swal-
lowing, inhaling).
— Remove spillage from your skin without delay.
— Do not store or consume beverages, food or tobacco in the
working area.
Spouting liquids
Health protection
Safety
BA-Classic FL_en-US, 03.05.2018 www.boerger.de / www.boerger.com 19
To Next Page
Loading...