Personnel:
n
Mechanics
Protective equip-
ment:
n
Occupational safety clothing, chemical
resistant
n
Safety shoes
n
Safety gloves, chemical-resistant
n
Safety goggles
— Read and follow the safety instructions detailed in
Ä
Chapter
2.12 “Safety instructions for maintenance and rectifying mal-
functions” on page 30.
1. Check all specifications in the technical data sheet and only
install the rotary lobe pump if it is suitable for the intended
application.
2. Apart from the performance data of the rotary lobe pump,
also check that the materials are compatible with the pumped
medium.
NOTICE!
Risk of material damage due to non-compliance with the
operating manuals for accessories!
Non-compliance with supplementary operating manuals for
special equipment or accessories can lead to damage to the
Börger machine.
— If your Börger machine is equipped with special equip-
ment, then you must first read the corresponding supple-
mentary operating manual for the equipment or accesso-
ries before carrying out any installation, commissioning,
maintenance or repair work on the machine.
3. Check that any accessories for the operation of the rotary
lobe pump are available and make sure that the accessories
are ready for operation according to the operating manual of
the manufacturer
.
If an incomplete unit has been delivered by request, fully assemble
the machine first.
Incomplete machine
Transportation, Storage and Installation
BA-Classic FL_en-US, 03.05.2018 www.boerger.de / www.boerger.com 63
To Next Page
Loading...