Personnel:
n
Mechanics
Protective equip-
ment:
n
Occupational safety clothing, chemical
resistant
n
Safety shoes
n
Safety gloves, chemical-resistant
n
Safety goggles
Special tool:
n
T
ools, general
n
Hammer drill
n
Torque wrench
— Read and follow the safety instructions detailed in
Ä
Chapter
2.12 “Safety instructions for maintenance and rectifying mal-
functions” on page 30.
— To the extent necessary, amply secure the surrounding area
when performing installation. Cordon off the working area with
a red and white safety chain and a warning sign.
1. Base frame
Attach the Börger machine to a solid, rigid surface.
2. Drive
Connect the Börger machine which is installed on a Börger
base frame or a suitable rigid surface to a suitable drive.
Observe the appropriate speed and suf
ficient torque, and
take all necessary parameters into account, such as viscosity
and the solid content of the medium.
3. Attach a suitable cover (coupling guard) for the rotating parts.
Transportation, Storage and Installation
BA-Classic FL_en-US, 03.05.2018www.boerger.de / www.boerger.com64
To Next Page
Loading...