NOTICE!
Risk of severe material damage due to a delayed shut-down
in the event of a malfunction!
A delayed shut-down in the event of malfunction can cause per-
manent damage to the Börger machine.
— In the event of a malfunction, shut down the Börger machine
and all upstream and downstream system components imme-
diately until the cause has been rectified.
NOTE!
Observe the note regarding the sequence of the measures at the
end of this chapter
.
Fault description Cause Remedy Personnel
The pump does not
start, or runs with
dif
ficulty after a
downtime
Drive not switched on,
not installed correctly or
defective
— Establish the correct drive func-
tion by connecting it to the
power supply, installing it cor-
rectly etc.
Qualified
electricians
Delayed shut-down
Troubleshooting
Operation
BA-Classic FL_en-US, 03.05.2018www.boerger.de / www.boerger.com96
To Next Page
Loading...