Bosch AVENAR panel - Page 12

12 en | AVENAR panel series AVENAR panel
2022-07 | 5.0 | F.01U.378.910
System manual
Bosch Sicherheitssysteme GmbH
AVENAR panel
2000, standard
license
AVENAR panel
2000, premium
license
AVENAR panel
8000, standard
license
AVENAR panel
8000, premium
license
Max. number of nodes 4 (1 panel, 3
keypads)
32 32 32
Table2.1: AVENAR panel series, four different licenses
i
Notice!
Building Management System
A premium license is required for each panel that needs to be available in a building
management system (e.g. BIS, FSM-5000-FSI). It is not sufficient to equip only one panel of
the network with a premium license, if you need all panels of the network in the building
management system.
i
Notice!
UGM-2040 hierarchy panel
A premium license is required for each panel that needs to be available in the UGM-2040
hierarchy panel. It is not sufficient to equip only one panel of the network with a premium
license, if you need all panels of the network in the hierarchy panel.
i
Notice!
Voice alarm system connected to AVENAR panel
Each fire panel which is physically connected to a voice alarm system via Smart Safety Link
needs a premium license.
i
Notice!
AVENAR panel 2000 networking
For each AVENAR panel 2000 which needs to be networked with other panels, a premium
license is required. It is not sufficient to equip only one AVENAR panel 2000 with a premium
license to network multiple panels. An AVENAR panel 2000 with premium license can be
networked with any AVENAR panel 8000 and with FPA-5000.
!
Caution!
Do not use any pointed or sharp objects (e.g. screw drivers, pens, etc.) when operating the
touch-sensitive display. The touchscreen may not be exposed to direct sunlight. Both can
seriously damage the touchscreen.
!
Warning!
The power button must be used to switch off the device before removing the power supply. It
may not be disconnected from power supply while system is running. The device may be
damaged if this procedure is violated. Not following this procedure may result in loss of
warranty. Refer to user guide for further information.