Bosch BMP581 - Page 59

Bosch Sensortec"| BST-BMP581-DS004-02 59 | 74
Modifications reserved | Data subject to change
without notice Document number: BST-BMP581-DS004-02
7.24 Register (0x2B) NVM address
Bit
7
6
5
4
3
2
1
0
Read/Write
R
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Reset Value
0
0
0
0
0
0
0
0
Content
reserved_7
nvm_pro...
nvm_row_address
nvm_row_address:(bit offset: 0) NVM (row) address (Note: this field cannot be written during an ongoing P/T
conversion.)
nvm_prog_en:(bit offset: 6) If set, enables NVM programming (Note: this field cannot be written during an ongoing P/ T
conversion.)
reserved_7:(bit offset: 7) reserved
7.25 Register (0x2C) NVM data (LSB)
Bit
7
6
5
4
3
2
1
0
Read/Write
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Reset Value
0
0
0
0
0
0
0
0
Content
nvm_data_lsb
 nvm_data_lsb:(bit offset: 0) NVM Data LSB, bits 7:0 Note: This field cannot be written during an ongoing conversion
and should be read-back only after an idle time of at least 1¬μs.
7.26 Register (0x2D) NVM data (MSB)
Bit
7
6
5
4
3
2
1
0
Read/Write
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Reset Value
0
0
0
0
0
0
0
0
Content
nvm_data_msb
 nvm_data_msb:(bit offset: 0) NVM Data MSB, bits 15:8 Note: This field cannot be written during an ongoing conver-
sion and should be read-back only after an idle time of at least 1¬μs.
.