D9412GV2/D7412GV2 | Troubleshooting Guide | 4.0 Appendix
124 Bosch Security Systems, Inc. | 11/05 | F01U011024B
4.3.2 Sending Programming Changes to the
Control Panel Using RPS
4.3 Programming the Control Panel
4.3.1 Receiving Control Panel Programming
Using RPS
1. Start the Remote Programming Software (RPS)
and open the desired account.
1. Start the Remote Programming Software (RPS)
and open the desired account.
2. If additional changes are made in RPS to the
account program after connecting to the control
panel, click Send/Rcv to send the changes to the
control panel.
2. Connect to the control panel and select Receive
Panel Data to import the current configuration
into RPS.
Click OK to start the transfer.
3. The Panel Sync dialog box appears.
Select Send RPS Data to Panel to send the data
to the panel.
Click OK to start the transfer.
3. The Receive Panel Data dialog box appears with
an animation of green dots moving from the panel
icon to the PC icon. The update is complete when
both progress bars are full and “Synchronization
complete” appears.
4. The Send to panel dialog box appears with an
animation of blue dots moving from the PC icon
to the control panel icon. The update is complete
when both progress bars are full and the words
“Synchronization complete” appear.
The Panel Update dialog box appears with three
options. Click the SAVE button to save the
received data and return to RPS.
To Next Page
Loading...
