Troubleshooting | 45Greensource CDi Series SM Model
8733819578 (2019/02)Greensource CDi Series SM Model
Subject to change without prior notice
TROUBLESHOOTING
HPC LED Status Indicator (Blink Code)
Information
The HPC LED status indicator is found on the HPC
board and is labeled “STATUS.”
Table 9 HPC LED Status Indications
Compressor Ohms
Table 10 Compressor Ohm
Indication
Color
Blinks Description
N/A
Status
LED is
OFF
No Fault
RED
Status
LED
solid
ON
Invalid Call
RED 1 High pressure lockout
RED 2 Low pressure lockout
RED 3 Coax Freeze sensor lockout
RED 4 Condensate overflow
RED 5 Brownout
RED 6 Evaporator Freeze lockout
Model Start Winding Run Winding
SM024 1.64 1.3
SM036 1.50 0.85
SM048 1.90 0.53
SM060 1.68 0.42
SM070 1.91 0.36
Tolerance +/- 7%. All resistance values must be
measured with compressor at room temperature.
To Next Page
Loading...
