Bosch Integral TS13 - If in Doubt, Look It up; Telephone Functions Overview

A
B
C
If in doubt, look it up
72
Telephone functions overview
Look up the name of the function if you do not know what this function does, e.g.
code dialing. This alphabetic list contains the functions that you can assign to the
programmable function keys (  p. 54). Please find further details onthe pages
indicated for the dif ferent functions.
Note:
Functions which are labeled with - , are not installed as standard with your phone.
Programming function keys
(→ p. LEERER MERKER)
Adjust the volume of the loudspeaker, the sound pattern of various tones
and the display contrast.
(only TH ) Within a partner group, this function key enables you to complete
an exchange connection for a partner telephone using your telephone.
If the called party is busy , your phone will send a signal as soon as the line
is free again. Y our phone and the phone of the previously busy subscriber
then ring and you can set up the call. However
, this is only possible for calls
within your system.
(→
p. 62)
Y ou can display a list of the accumulated telephone charges.
(→ p. 51)
Y ou can divert calls to another telephone in your system.
Y ou can also divert calls to an external line depending on the system.
(→ p. 21)
This allows you to dial numbers that are stored in the system, regardless of
your authorization. When you enter the code dial number , the complete
number is dialed automatically . Y ou can postdial additional digits after the
code dial number (e.g. a DID number).
(→ p. 42)
Y ou can speak to two parties simultaneously .
Audio/Contrast
BLIN
Boss line
Call back
Call charges
Call diversion
Code dial
Conference