S
T
If in doubt, look it up
76
Telephone
functions overview
A
(→
p. 38)
Deactivate second call in the specifications menu (only possible in idle
mode) if you do not want to be disturbed by additional calls. All additional
calls are entered in the call list. Y
ou can also activate the no second call
function during a call, if you have assigned it to a function key
.
Y
ou can change the dialing method during a conversation if you want to
operate an answering machine by remote control, for example.
Y
ou can equip your telephone with an additional ringing tone. Now your
telephone ring can, for example, be signalled in the neighbouring room.
The second alarm is connected to the telephone’
s AEI interface via a
switch contact.
Please contact BOSCH TELECOM as required.
(→
p. 38)
Y
ou answer an additional call during an existing call and connect this call to
another party. The function is programmed as a standard.
This key allows you to view text which is abbreviated in the display with “...”
because it is too long for the display line. The key moves the text through
the display
.
This function is. useful when you find a minimail in your mailbox and the
name of the sender is only partially visible in the display
, for example.
Y
ou can register the call numbers of unwanted callers.
Second
call
Secondary dialing (DTMF)
Switch contact
-
Transfer
call
Text shift key
Trap -
To Next Page
Loading...
