EasyManua.ls Logo

Bosch KTS 340 - Current Measurement (CH1 and CH2); Continuity Tester (CH1); Diode Measurement (CH1); Wlan

Bosch KTS 340
32 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1 689 989 038 2008-08-15| Robert Bosch GmbH
30 | KTS 340 | Technical dataen
Current measurement (CH1 and CH2)7.4.4
Sensor Measuring range
Shunt (CH1 only) ±600 mA
30 A clip (CH1 only) ±30 A
100 A clip ±100 A
600 A clip ±600 A
1000 A clip (CH1 only) ±1000 A
Continuity tester (CH1)7.4.5
Properties Value/range
Measurement current 2 mA
No-load voltage ≤ 5 V
Continuity < 10 (with acoustic signalling)
Diode measurement (CH1)7.4.6
Properties Value/range
Measurement current 2 mA
No-load voltage ≤ 5 V
Maximum diode voltage 2 V
WLAN7.5
Standard: IEEE 802.11g (54 Mbit/s), compatible with
IEEE 802.11b (11 Mbit/s), data encoding: WPA,
WPA-PSK, WPA2, WPA2-PSK, WEP (64/128/256 bits),
antenna: -3dBi.
Radio link
KTS 340 to PC/Laptop
Minimum range
Free field workshop environment 30 meters
In passenger compartment, with vehicle
door or window open and engine
running
10 meters
The range of the WLAN differs considerably.
20–40 m can normally be achieved indoors and up to
100 m outdoors.
Under adverse conditions the effective range may only
be 10–15 m or even less.
The KTS 340 automatically adapts the transmission
rate in the WLAN to the transmission conditions. In the
event of a poor radio link the data are transmitted
more slowly than with a good link.
MPE Statement (Maximum Permissible expo-7.5.1
sure)
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with mini-
mum distance 20 cm between the radiator & your body.
§15B Statement7.5.2
This device complies with part 15 of the FCC Rules.
Operation is subject to the condition that this device
does not cause harmful interference.

Table of Contents

Other manuals for Bosch KTS 340

Related product manuals