Recycling
Most of the products can be recycled due to their high content of metal. In
order to recycle the metal in the best possible way, the products must be dis‐
assembled into individual assemblies.
Metals contained in electric and electronic assemblies can also be recycled
by means of special separation processes.
Plastic parts of the products may contain flame retardants. These plastic
parts are labeled according to EN ISO 1043. They have to be recycled sepa‐
rately or disposed of according to the applicable legal provisions.
Bosch Rexroth AG DOK-MOTOR*-MSM********-DA05-EN-P52/61
Synchronous Servomotors MSM
Environmental protection and disposal
To Next Page
Loading...
