7.2 Electrical connection "M" cable connection circular connector
M17
SpeedCon quick lock IP67
The connections for power and encoder MSM motors are done via flexible
connection lines with circular connector M17 (IP67) and Speedcon fastener.
1 Encoder connection (green code ring)
2 Power connection (black code ring)
Fig. 7-3: MSM SpeedCon motor connection
For the length of the flexible connection line, please refer to the following ta‐
ble.
Motor
Length connection line ("M" cable connection circular connetor
M17)
Encoder Power
MSM019
230 mm (+47 mm plug connec‐
tor RGS1782)
200 mm (+47 mm plug connec‐
tor RLS1722)MSM031
220 mm (+47 mm plug connec‐
tor RGS1782)
MSM041
Tab. 7-2: MSM motors: Length of connection line ("M" cable connection circu‐
lar connector M17)
Fig. 7-4: SpeedCon quick lock
Rack the cable connector in “open” position and "manually" tighten the power
connector with a rotation by approx. 90°.
DOK-MOTOR*-MSM********-DA05-EN-P Bosch Rexroth AG 39/61
Synchronous Servomotors MSM
Connection technique
To Next Page
Loading...
