Bosch Rexroth CIMS Mk IV - 7.4. Signal Converters

F 037 300 069 (2013.05.21)
28
7.4. SIGNAL CONVERTERS
Two signal converters can be delivered by Bosch Rexroth:
 RS-485 to USB converter for the CIMS Mk IV diagnostic output
A RS-485 to USB converter to connect the diagnostic output from
the CIMS Mk IV to a PC.
Order number: R113089697
 RS-422 to analog converter for the CIMS MkIV position output
A counter module/converter, to convert the CIMS Mk IV incremental
RS422 output to an analogue +/-10 V, 0-20 mA or 4-20 mA.
Furthermore the module has a RS-232 and RS-485 interfaces for
serial readout of the counter. The module is easy to set up by a
teach button, or by PC and Windows software.
Order number: R987119866