Bosch Rexroth HEDE 10-3 Series - Page 13

Safety instructions 13/48
RE 30277-02-B/07.2016, HEDE 10-3X, Bosch Rexroth AG
CAUTION
Exceedance of the maximum temperatures!
When the pressure sensor is operated outside the specied
temperatures, malfunction or failures, e.g. overheating, may occur
and thus pose a risk of injury.
▶ Operate the pressure sensors only within the ambient and uid
temperatures provided for them.
• Before commissioning the pressure sensor, read this document and
make sure that the product is suitable for your application without
any restrictions.
• Check the compatibility of the product materials with the media to
be measured in all applications.
• Correct condition of the pressure sensor during operation can
only be guaranteed if it is only used for media, to which the wetted
materials are suciently resistant.
• The pressure sensor may only be operated within the specied
measuring range.
• The maximum pressure resistance specied must not be exceeded.
Even brief exceeding of the maximum pressure resistance can lead
to the destruction of the pressure sensor.
• Notes on pressure limits, product materials and materials in contact
with the media as well as further information can be found in the
technical data (see data sheet).