Maintenance and repair 39/48
RE 30277-02-B/07.2016, HEDE 10-3X, Bosch Rexroth AG
10.1 Cleaning and care
NOTICE
Solvents and aggressive cleaning agents!
Aggressive detergents may damage the seals and the surface of
hydraulic components and causes the product to age faster.
▶ Never use solvents or aggressive cleaning agents.
▶ Close all openings with appropriate protective caps.
▶ Clean the components using only a damp, non-linting cloth. Only
use water and a mild detergent, if necessary, to do so.
▶ Remove dust and dirt accumulations on the hydraulic device at
regular intervals.
10.2 Spare parts
The available spare parts and seal kits are specied in the relevant
data sheet. You can order spare parts from the address given in
chapter 16.1 “Address directory“ on page 31.
10.3 Repair
Rexroth pressure sensors may only be replaced as a complete unit.
Unauthorized modications to devices are not permitted for safety
reasons! Repairs may only be carried out by Bosch Rexroth AG.
For repairs send the device to the service address given in chapter
16.1. Please return the devices to us in their original packaging.
Repaired devices are returned with default settings. In the case of
parameterized devices, user-specic settings are not maintained. The
user must transmit the relevant user parameters and programs again.
To Next Page
Loading...
