Bosch Rexroth HEDE 10-3 Series - Reading the Parameter Settings; Maintenance and Repair

38/48 Maintenance and repair
Bosch Rexroth AG, HEDE 10-3X, RE 30277-02-B/07.2016
9.1 Reading the parameter settings
▶ Press [●].
▶ Press [▲] or [▼] until the requested parameter is displayed.
▶ Briey press [●].
The unit displays the corresponding parameter value for approx.
30 s and then changes to the process value display.
10 Maintenance and repair
Rexroth pressure sensors are usually maintenance-free.
The seals of pressure sensors are subject to a natural process of
wear and aging. It is therefore recommended that they are changed at
reasonable intervals. The time intervals are mainly determined by the
operating conditions and cleanliness of the hydraulic uid.
▶ Inspect the product and connection faces regularly for tightness!
▶ Replace the seals at reasonable intervals as a precautionary
measure.
Preventive maintenance (e.g. hydraulic uid maintenance) and
adherence to specied pressures and temperatures prolongs
the service life of the system and the components.