Bosch Rexroth HEDE 10-3 Series - Operation

Operation 37/48
RE 30277-02-B/07.2016, HEDE 10-3X, Bosch Rexroth AG
Display color change for the
parameter [r-cF] independently of
OUT1.
Display color change for the
parameter [G-cF] independently
of OUT1.
1
cFL
2
cFH
1
cFL
2
cFH
Measured value between cFL and
cFH;
display = red
Measured value between cFL
and cFH;
display = green
Color change display green
Color change display red
1 Lower measuring range limit
2 Upper measuring range limit
cFL Lower limit value (independent of the output function)
cFH Upper limit value (independent of the output function)
9 Operation
After power ON, the unit is in the run mode (normal operating mode).
It carries out measurement and evaluation functions and provides
output signals according to the set parameters.
Operating displays → 8.1 Operating and display elements.