Bosch Rexroth HEDE 10-3 Series - Page 4

4/48
Bosch Rexroth AG, HEDE 10-3X, RE 30277-02-B/07.2016
8.3.1 Parameter setting in general 27
8.4 Conguring the display (optional) 30
8.5 Setting the output signals 31
8.5.1 Setting the output functions 31
8.5.2 Determining the switching limits for the hysteresis function 31
8.5.3 Determining the switching limits for the window function 32
8.6 User settings (optional) 32
8.6.1 Setting the delay for the switching outputs 32
8.6.2 Setting damping for the switching signal 32
8.6.3 Setting damping for the analog output 33
8.6.4 Reading the min/max values for the system pressure 33
8.6.5 Resetting all parameters to factory setting 33
8.6.6 Set color change of the display color 34
8.6.7 Graphical depiction of the color change of the display 35
9 Operation 37
9.1 Reading the parameter settings 38
10 Maintenance and repair 38
10.1 Cleaning and care 39
10.2 Spare parts 39
10.3 Repair 39
11 Demounting and replacement 40
12 Disposal 41
12.1 Environmental protection 41
12.2 Return to Bosch Rexroth AG 41
12.3 Packaging 42
12.4 Materials used 42
12.5 Recycling 42
13 Extensionandmodication 42
14 Troubleshooting 43
14.1 Self-diagnosis/error indications 43
14.2 Setting ranges 45
14.3 Factory setting 46
15 Technical data 46
16 Annex 47
16.1 Address directory 47