Bosch Rexroth IndraControl L45 - Inappropriate Use

The IndraControl L45/L65/L85
may only be operated under the assembly and
installation conditions, in the position of application and under the ambient con‐
ditions (temperature, degree of protection, humidity, EMC, etc.) specified in this
documentation.
The emission (EMC) of this device is tested according to EN
61000-6-4
and complys with limit class A according to IEC/CISPR
22. Therefore the device is suitable for use in industrial environ‐
ments. For use in residential and commercial areas additional noise
suppression measures may be required, if applicable.
2.2 Inappropriate Use
Any
use of IndraControl L45/L65/L85 in applications other than those specified
above or under operating conditions other than those described in the docu‐
mentation and the technical specifications is considered to be "non-intended
use".
IndraControl L45/L65/L85 must not be used if
● it is exposed to operating conditions that do not fulfill the ambient condi‐
tions specified. For instance, operation under water, in case of extreme
variations of temperature or in extreme maximum temperatures is not al‐
lowed.
● they are used in household devices or devices belonging to categories 1
to 7 and 10 specified in Appendix IA of the Directive 2002/96/EC
("WEEE").
Bosch Rexroth AG DOK-CONTRL-ICL45L65L85-PR01-EN-P
Rexroth IndraControl L45/L65/L85 Control
8/81
Important Instructions on Use