Fig.7-1: Connections of the IndraControl L45/L65/L85
Fitting or removing connectors when voltage is
applied, may damage the IndraControl L45/
L65/L85, a function module or an Inline termi‐
nal!
NOTICE
Turn off the supply voltage before establishing or breaking any connections!
7.2 Voltage Supply
7.2.1
Supply Voltages to be Connected Externally
General Information
PWR IN
The IndraControl L45/L65/L85 as well as connected function modules and In‐
line terminals are supplied with power via the black connector on the right side
of the IndraControl L45/L65/L85. The both connector variants have the same
electrical functionality. The segment voltage U
S
, the supply voltage U
LS
, and
the main voltage U
M
are connected via the connector. For notes on the ground
screw, please refer to chapter 8.3.5 "Grounding
" on page 58.
Slot 5:
Bosch Rexroth AG DOK-CONTRL-ICL45L65L85-PR01-EN-P
Rexroth IndraControl L45/L65/L85 Control
32/81
Connections and Interfaces
To Next Page
Loading...
