① Connector for supply voltage of connector set S01
② Connector for supply voltage of connector set S04
Fig.7-2: Connector for supply voltages
Observe the color-coding of the connectors.
To connect the operating voltages, only the feeder connector that
is
contained in the connector set available as accessories for the
IndraControl L45/L65/L85 is allowed, see chapter 9.2.1 "Required
Accessories (Connector Set)" on page 69. The R-IB IL SCN-PWR
IN-CP connector, which is available for other power terminals, is not
allowed for the IndraControl L45/L65/L85!
Connector contact Signal
1.1 DC +24 V segment voltage (U
S
)
1.2 DC +24 V supply voltage (U
LS
)
1.3 LGND (ground, supply voltage)
1.4 and 2.4 FE (functional earth ground)
2.1 DC +24 V uninterruptible power supply (UPS), currently not
supported
DOK-CONTRL-ICL45L65L85-PR01-EN-P
Rexroth IndraControl L45/L65/L85 Control
Bosch Rexroth AG 33/81
Connections and Interfaces
To Next Page
Loading...
