1-24 System Overview MPH-02, MPB-02, MPD-02
DOK-INDRV*-MP*-02VRS**-FK01-EN-P
Base Packages
In the base packages of the firmware the minimum scope of
functionalities in the respective operating mode ("open-loop" or "closed-
loop") is available. They contain the basic functions of a drive firmware
and a number of other fundamental functions.
Basic Functions
The following basic functions are available for every drive and contain the
fundamental base functions of a digital drive (available as firmware
characteristics "open-loop" and "closed-loop"):
• numerous diagnostic possibilities
• drive-internal generation of diagnostic messages
• monitoring function
• analog output
• patch function
• status displays, status classes
• oscilloscope feature
• code of optional card
• parameter value check
• operating hours meter, logbook function, error memory
• undervoltage monitor
• output of control signals
• limits that can be parameterized
• serial communication
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
To Next Page
Loading...
