Bosch rexroth M1-16 Series - Page 20

20/54 Control blocks for mobile applications | About these products
Bosch Rexroth AG, RE 64025-B/2021-08-12
1
9
3/4
R908404405 A
Made in France
1603101606A2
1001104292
2
6
12
Fig. 2: Name plate example SX
1 Word mark (manufacturer)
2 Control block material number
3 Manufacturing date
4 Serial number
5 Type designation (material short text)
6 Customer material number (optional)
7 Customer, production, repair order
or project number (optional)
8 Performance parameters (optional)
9 Designation oforigin
10 Rexroth supplier number at the
customer (optional)
11 Area/plant number
12 DataMatrix code
13 Identification number (4digits) of
the notified body
14 CE conformity sign (optional)
 Make sure that the name plates inplace are not damaged.
 By comparing the material number of the control block on the respective name
plate to the parameters in the offer drawing, check that this instruction manual
refers to the product in question.
If indoubt, please contact BoschRexroth.
The information onthe above name plate may vary depending onorder-specific
requirements. For instance, on customer-specific name plates, the customer
logo may replace the Rexrothlogo.
Any other labeling onthe product isjust forBoschRexroth-internal purposes.