Bosch rexroth M1-16 Series - General Safety Instructions; Product-Specific Safety Instructions

RE 64025-B/2021-08-12, Bosch Rexroth AG
Safety instructions | Control blocks for mobile applications 11/54
2�5 General safety instructions
• Observe applicable accident prevention specifications and environmental
protection regulations.
• Observe thesafety regulations ofthecountry inwhich theproduct
isused/operated.
• Use Rexrothproducts only when they are ingood working order.
• Observe all notices onthe product.
• Do not install, operate, remove ormaintain Rexrothproducts ifunder
theinfluence ofalcohol, drugs ormedication that may affect your reaction time.
• Only use genuine Rexroth accessories and spare parts toensure there isno
hazard to persons caused by unsuitable spare parts.
• Observe thetechnical data and ambient conditions specified inthe product
documentation.
• If unsuitable products are installed orused inapplications that are ofrelevance
tosafety, unexpected operating conditions may occur inthe application, which
could result inpersonal injury orproperty damage. For this reason, only use
the product in safety-relevant applications if this use is expressly specified and
permitted in the product documentation, for example in explosion protection
areas or in safety-related parts of a control system (functional safety).
• Only commission theproduct ifit has been determined that theend product
(e.g.machinery orsystem) inwhich theRexrothproducts are installed
corresponds to thecountry-specific provisions, safety regulations and standards
for theapplication.
• Use tools appropriate for thework being performed and wear appropriate
protective clothing toprevent punctures and cuts (e.g.when removing protective
covers, disassembly).
2�6 Product-specific safety instructions
The following safety instructions apply forchapters 6 to14.
WARNING
Danger due tosuspended loads!
Danger tolife, risk ofinjury orproperty damage!
In the event ofinappropriate transport, the control block might fall down and
lead toinjury, e.g.bruises orfractures and/or damage tothe product.
 Ensure that the load bearing capacity ofthe lifting device isdimensioned
sufficiently inorder tosafely carry the weight ofthe control block.
 Never step orgrip under suspended loads.
 Ensure astable transport position.
 Use your personal protective equipment (e.g. safety goggles, safety gloves,
suitable working clothes, safety shoes).
 Use suitable lifting devices for transport.
 Observe theprescribed position ofthelifting strap.
 Observe thenational laws and specifications ofoccupational safety and health
and transport.