Bosch rexroth M1-16 Series - About this Documentation

RE 64025-B/2021-08-12, Bosch Rexroth AG
About this documentation | Control blocks for mobile applications 5/54
1 About this documentation
1�1 Validity ofthedocumentation
This documentation isvalid for thefollowing products:
• M1
• M4
• M6
• M7
• M8
• M9
• MO
• RCS
• ROM8
• RS
• SM
• SP
• SX
This documentation applies to all control blocks of the named series, regardless of
their manufacturing date up to a new revision of this document.
This documentation is intended formachine manufacturers.
This documentation contains important information onsafe and proper transport,
installation and disassembly, commissioning, operation, maintenance and servicing
ofthe product.
 Read this documentation completely and in particular the chapters entitled2
"Safety instructions" page9 and3 "General instructions on property
damage and product damage" on page15 before you start work with the
control block.
1�2 Required and supplementary documentation
 Only commission the product ifthe documentation marked with the
book symbol
isavailable, understood and complied with.
Table 1: Required and supplementary documentation
Title Document number Document type
Technicaldatasheet
Contains the permissible technical data.
Please bear inmind that different technical datasheets apply
depending onthe series:
Datasheet
Open-center control block MO-16, 22, 32 64354
Open-center control block MO-40 64370
Open-center control block MO-52 64373
Open-center control block M1 64263
Open-center control block M8 64294
Open-center control block M9 64303
Open-center control block ROM8 66162
Open-center control block SM 64122
Closed-center control block RCS30 64155
Closed-center control block RCS35 64157
Load-sensing control block M4-12 64276
Load-sensing control block M4-15 64283
Load-sensing control block M4-22 64279
Load-sensing control block SP-08 64139