Bosch Vivalytic - During Test Execution

© Bosch Healthcare Solutions GmbH 11Instructions for use
Performing a test
WARNING
• Do not attempt to reopen the cartridge lid.
• Insufficient or incorrect sample volume or sample types other than those recommended
canlead to incorrect results.
• You will find a detailed description of the recommended sample types and volume in the
corresponding application-specific instructions for use.
• Be careful not to contaminate the cartridge.
Inserting the cartridge
With the analyser slot open, insert the closed cartridge
inthe direction shown by the arrow.
The cartridge is drawn in and the test starts automatically .
Make sure to insert the same cartridge as scanned to avoid a mix-up.
WARNING
• Do not try to block the door of the analyser slot.
• Do not reach into the analyser slot.
3.4 While running a test
SMH
01 16 51
TEST NAME
Detection
Everything is running well.
ID 342 346 23
During a test the following information will be displayed:
• Current test status information
• Remaining test time
• Sample data
• Test description
4
CONTINUE
enabled
Press to see further detailed information.
4
CONTINUE
enabled
Press to cancel the test run and confirm that you
wanttocancel.
• User can be switched during a test run.
• Cancelled test runs also appear in the joblist.