Bosch Vivalytic - Analyser Setup Procedures; Unpacking the analyser; Placement on a flat surface; Connecting to power

© Bosch Healthcare Solutions GmbH 1Instructions for use
How to set up the analyser
1
Unpack.
2
Place on a flat
surface.
3
Connect to a power
source.
4
Switch on.
How to perform a test
1
Scan sample code.
2
Scan cartridge code.
3
Insert the sample and
close cartridge lid.
4
Insert cartridge. The test
starts automatically.
How to exchange the air filter
1
Shutdown, turn off
and unplug.
2
Turn over.
3
Remove used air filter.
4
Insert new air filter.
Carefully read instructions for use
The user must consult and follow the instructions for use before using Vivalytic.