Set up and connect NL
2. Loosen and remove all bolts of the
4 transport locks with a SW13
open-end wrench
.
5. Install the 4 cover caps.
6. Push the 4 cover caps down.
3. Pull the mains connection cable out of the
holder.
4.5 Connecting device
4. Remove the 4 sleeves.
Connect water supply hose
WARNING
Risk of electric shock!
The device contains live parts.
Touching live parts is dangerous.
▶ The electric Aquastop valve
do not immerse in water.
15
To Next Page
Loading...
