NL Child lock
– Start the program at a high
temperature To rinse.
– Start at a high water level
a The controls are
blocked.
a The childproof lock remains in effect even after the
switching of the device activated.the program Centrifuge
or select a suitable program for
draining.
→
"Programs", Page 27
14.2 Deactivate child lock
3. Remove the laundry
→
Page 34.
Required: To deactivate the child lock,
the appliance must be
13.10 Remove the laundry
switched.
▶ Approx. 3 s on
3s to press.
1. Open the appliance door.
2. Remove the laundry.
I1intelligent dosing system
13.11 Switch off device
5 Intelligent dosing system
tem
1. Press .
2. Wipe the rubber sleeve dry and
remove foreign objects.
IDepending on the program and the
settings, the optimum amounts of
liquid detergent and fabric softener
are dosed automatically.
intelligent dosing system
15.1 Program with intelligent
dosing system
start
If you do not want to dose liquid
detergent and fabric softener
manually, use the intelligent dosing
system. This function is available
depending on the program set and is
activated automatically.
3. Leave the appliance door and
detergent drawer open so that the
residual water can dry out.
Remark
If you use the intelligent dosing
system, do not add extra detergent
or fabric softener to the manual
dosing dispenser.
→
"Detergent and care products
dosing", page 33
If you want to dose manually for a
set program, please observe the
following instructions:
s Deactivate the intelligent dosing
system before starting the
program. The settings remain
k1lock
4 Child lock
kSecure your device against
unintentional operation via the control
elements.
lock
14.1 Activating child lock
▶ Approx. 3 s on
3s to press.
34
To Next Page
Loading...
