Transport, storage and disposal NL
19.1 Emergency release
1. Close the tap.
2. Empty the water inlet hose.
3. Turn off the device.
unlock door
Required: The drain pump is empty.
→
Page 42
4. Unplug the appliance from the
mains.
1. ATTENTION! Running water can
lead to material damage.
▶ Do not open the door if there is water
can be seen behind the glass.
5. Let the suds drain.
→
"Clean the drain pump",
Page 42
6. Disassemble the hoses.
7. Empty the dosing containers.
Pull down and release the
emergency release with the aid of
a tool.
20.2 Installing transport locks
Secure the device before
transport with the transport locks
to avoid damage.
1. Remove the 4 cover caps using a
screwdriver.
a The door lock is unlocked.
2. Place the service cover and click it
into place.
3. Close the service door.
T2transport, storage and disposal
0 Transport, on-
hit and drain
Keep the cover caps.
2. Install the 4 transport locks. When
doing so, observe the description
Removing transport locks and
proceed in reverse order.
Thuhtransport, storage and disposal
Here you will learn how to prepare
the device for transport and storage.
We also explain how to dispose of
old devices.
20.3 Recommissioning the
device
20.1 Disassemble device
Remark: Detailed instructions for use
can be found at www.bosch-
home.com or by scanning the QR
code on the title page of these
operating instructions.
▶ For more information, see
→
"Set up and connect",
Page 13
and
→
"For the first use",
Page 20.
57
To Next Page
Loading...
