Bosch WAL28PH7NL - Home Connect; Device with WLAN Home Network (Wifi) with WPS Connect Function

Home Connect NL
huh1uncle Connect 6 Home Connect
s Operating the device
always takes precedence. During
this time, operation via the Home
Connect app is not possible.
huhThis device is suitable for networks.
Connect your device to a mobile end
device to be able to operate
functions via the Home Connect app,
adjust basic settings or monitor the
current operating status.
uncle Connect
16.1 Connecting a device to a
WLAN home network
(WiFi) with WPS function
Requirements
Remark: Detailed instructions for use
can be found at www.bosch-
home.com or by scanning the QR
code on the title page of these
operating instructions.
s Your router has a WPS
function.
s Wifi on the router is activated.
s The basic WiFi setting on the device
rate is activated.
→ "Activate WiFi on the device",
Page 39
s The appliance has
cation reception from the home
network (Wi-Fi).
s The Home Connect app is on the
mobile terminal installed.
The Home Connect services are not
available in every country. The
availability of the Home Connect
function depends on the availability of
the Home Connect services in your
country. Information on this can be
found at: www.home-connect.com.
s → " Device with WLAN home network
work (WiFi) with WPS function",
page 37
s → " Device with WLAN home network
work (WiFi) without WPS
function", page 38
The Home Connect app guides you
through the entire registration
process. Follow the instructions in the
Home Connect app to make the
settings.
1. Press for at least 3 seconds
know.
a The display shows auto reflected
to give.
2. Press .
3. Press the WPS button on the
router within 2 minutes.
Observe the information in
your router's documentation.
a flashes in the display.
a The device is connecting
with the home Wi-Fi network.
a When on the display con is becoming
displayed and permanent
lights up, the device is connected
to the home WiFi network.
Tips
s Take the supplied document
of Home Connect.
s Also take the directions
the Home Connect app.
Remarks
s Follow the safety instructions
ties in these operating instructions
and make sure that they are also
observed when you operate the
appliance via the Home Connect app.
→ "Safety", Page 4
4. If the display shows Home Connect
Error, the appliance is not connected
to the home WiFi network.
s Check if the device is within
range of the Wi-Fi network.
37