NL Home Connect
s Reconnect the device to the Wi-
Fi network with WPS function.
Connect the mobile end device to
the HomeConnect WiFi network
and enter the HomeConnect WiFi
password (key).
a Your mobile end device makes
connection to the device. The
connection procedure can take up
to 60 seconds.
5. Connect the appliance to the
Home Connect app. →
Page 38
16.2 Connecting a device to a
WLAN home network
(WiFi) without WPS
function
5. Open the Home Connect app on
the mobile end device and follow
the steps in the app.
If your router does not have WPS
function, you can manually connect the
device to your home network (Wi-Fi).
6. Enter the network name (SSID) and
password (key) of your home
network in the Home Connect app.
Requirements
7. Follow the steps in the Home
Connect app to connect the
appliance.
s Wifi on the router is activated.
s The basic WiFi setting on the device
rate is activated.
→
"Activate WiFi on the device",
Page 39
s The appliance has
cation reception from the home
network (Wi-Fi).
s The Home Connect app is on the
mobile terminal installed.
a When on the display con is becoming
displayed and permanent
lights up, the device is connected
to the home WiFi network.
8. If the display shows Home Connect
Error, the appliance is not connected
to the home WiFi network.
s Check if the device is within
range of the Wi-Fi network.
s Reconnect the device to the Wi-
Fi network with WPS function.
1. Press for at least 3 seconds
know.
a The display shows auto reflected
to give.
2. Set the program to position 2.
a The display shows JUICE reflected
9. Connecting the appliance to the
Home Connect app →
Page 38.
to give.
3. Press .
16.3 Connecting the device to
the Home Connect app
a flashes in the display .
a The device creates its own WiFi
home network with the network
name (SSID) HomeConnect on.
Requirements
4. Call up the WiFi settings on the
mobile end device.
s The device is connected to the
WiFi home network.
s The Home Connect app is open
and you have signed up.
38
To Next Page
Loading...
