Declaration of Conformity NL
mains voltage 220-240V,
50 Hz
from the slash mark of the E number
(E-No.) on the rating plate.
Alternatively, you will also find the
model identifier in the first line of the
EU energy label.
Minimum input
installation fuse
10 A
2300WRated power
gene
Recorded Ver-
be allowed to
s Off state:
0.10W
s non-disabled
caved in
position: 0.50 W
s Time to the net
work-related
standby becomes
set (Wi-Fi
Fi): not used
min
s network
unions standing
by (WiFi): not
used W
C2declaration of non-compliance 4 Declaration of Conformity
ring
CRobert Bosch Hausgeräte GmbH
hereby declares that the appliance
with Home Connect functionality
complies with the basic requirements
and other applicable provisions of
Directive 2014/53/EU.
A detailed RED declaration of
conformity can be found on the
Internet at www.bosch-home.com on
the product page of your appliance
in the additional documents.
declaration of non-compliance
water pressure s At least:
100 kPa
(1 bar)
s Maximum:
1000 kPa
(10 bar)
2.4 GHz band (2400–2483.5 MHz):
max. 100 mW
5 GHz band (5150–5350 MHz +
5470–5725 MHz): max. 100 mW
Length of the
water supply
feeding hose
150 cm
Length of the
water drain hose
150 cm
160 cmLength of the
mains connection cable
1 Depending on the device version
You can find more information about
your model on the Internet at https://
eprel.ec.europa.eu/1. This web address
refers to the official EU product
database EPREL. Then follow the
instructions when searching for the
model. The model identifier exists
1 Only applies to countries in the European Economic Area
61
To Next Page
Loading...
