Set up and connect NL
2. To adjust the appliance, turn the
appliance feet. Check the horizontal
adjustment of the appliance with a
spirit level.
2. Check the mains plug for tightness.
All appliance feet must be firmly
planted on the floor.
3. Tighten the lock nuts against the
housing with an open-end
wrench SW17 hand-tight.
Hold the appliance foot while
doing so and do not adjust the
height.
4.7 Connecting the appliance
electrically
1. Insert the mains plug of the
appliance's mains cable into a
mains socket in the vicinity of
the appliance.
The connection data of the device
can be found in the technical data
→
Page 60.
17
To Next Page
Loading...
