Cleaning and maintenance NL
2. Turn off the device. 7.
CAUTION - Chance of
3. Disconnect the plug of the device
from the mains.
burns! The soapy water gets hot
when washing at high
temperatures.
▶ Do not touch the hot soapy water.
4. Open and remove the service
door.
Pull off the sealing cap to allow the
wash water to flow into the collection
container.
1
2
5. Place a sufficiently large
container under the opening.
8. Press the stopper back on.
6. Remove the drain hose from the holder.
9. Clamp the drain hose in the holder.
43
To Next Page
Loading...
